Asia Pacific | Global

 

Change in the Phase ring concept of the AE2000

Hits:4762011-07-27 00:00:00 

Motic announces a change in the Phase ring concept of the AE2000. As of today there are 2 new objectives available; PH20X and PH40X that both work with the Ph1 ring. These 2 new objectives will be replacing the Ph2 ring objectives.

 

This improvement means that you can cover the PH10X, PH20X and PH40X objectives with the Ph1 ring. The PH4X objective will remain unchanged and therefore will continue to use the Ph0 ring.

 

Consequently the standard configuration of an AE2000 will be as follows:

 

•Binocular/Trinocular head, 360° Swiveling type, 45° inclined (light split in Trino head 100:0/20:80) or Binocular Ergo head, 360° Swiveling type, 45° inclined with a range of +/- 15°
•Interpupillary distance 48-75mm
•Widefield high eyepoint eyepieces, N-WF 10X/20mm with diopter adjustment on both eyepieces, with rubber eyecups
•Quadruple revolving nosepiece, left side orientated
•CCIS Plan Achromatic objectives PL4X, LWD PL40X
•CCIS Plan Achromatic Phase objectives PL Ph10X, LWD PL Ph20X
•Coaxial coarse and fine focusing system
•Hard coated stage 200X239mm
•ELWD condenser N.A. 0.30, working distance 72mm
•3-Postion Phase slider, with BF and Ph1 ring(10X, 20X and 40X)
•Phase centering telescope
•6V/30W Quartz Halogen illumination with intensity control and sleeping mode
•Universal Power supply 100-240V
•Metal stage plate, Glass stage plate, 45mm blue, green interference and neutral density filters with filter, centering screws, Allen hexagonal key, vinyl dust cover and power cord
 

In case of any questions, please do not hesitate to contact us.

Print】【Back
 
▲ Top of the page
Copyright © 2017 www.motic.com All Rights Reserved.